The cable supplier introduces the product classification of the cable supplier in detail, including the use, model, range, picture, 南方双彩网 and price of all products under the cable supplier . At the same time, we have also selected the industry information, price quotes, exhibition information, picture information, etc. of the cable supplier classification for you, and have been well received by users in the country. For more details, please click to visit!
What causes the damage of rubber sheathed wires and cables? If any product is damaged or has quality problems, there are certain influencing factors, and rubber sheathed products are no exception; we are prone to some damage and quality when using rubber sheathed cables. Problem, then what causes the rubber sheathed wire and cable to break? Is there any way to avoid the rubber sheathed cable from being damaged? Release time: 2019-12-10 Clicks: 59
The use of electricity has led to the rapid development of modern life. If electric wires are not used and maintained properly, it may cause some safety hazards, which will lead to accidents, especially fires. In the use of pumps and motors, the cable is the main. In order to safely construct and ensure the quality of the cable, we need to perform the following maintenance on the cable: regularly clean the dust accumulated on the wires and cables to prevent Release time: 2019-11-15 Clicks: 56
What are the main processes of wire and cable production? Wires and cables are produced through several main processes such as drawing, twisting, and covering. The more complicated the model specifications, the higher the repeatability. 1. Drawing In the process of metal pressing, the metal is forced through a die (press wheel) under the action of external force, the cross-sectional area of the metal is compressed, and the required cross-sectional area shape and size are obtained. Release time: 2019-09-02 Clicks: 42
How to determine Zhengzhou wire and cable breakpoint The following wire and cable manufacturers will talk about this problem for everyone, let's take a look below! When a breakpoint failure occurs inside the cable or cable, it is difficult to intuitively determine the location of the breakpoint due to the wrapping of the external insulation. Here are some ways to quickly determine the breakpoints of wires and cables. Release time: 2019-08-22 Clicks: 42
What should I do if the overhead cable fails? Methods to prevent shortcomings of overhead cables: 1. Make a calculation of short-circuit current, properly select and verify electrical equipment, and make the rated voltage of electrical equipment match the rated voltage of the line. 2. Correctly select the setting value of relay maintenance and the rated current of the melt, and select quick-break maintenance equipment, so that short-circuit power can be blocked quickly when a short-circuit occurs. Release time: 2019-08-15 Clicks: 43
Five common reasons for appearance defects of rubber-sheathed cables In the production process of rubber-sheathed cables, appearance defects often occur, such as the surface is not smooth; the surface has clinker particles (early vulcanized rubber particles) or impurities; Injuries and abrasions; collapse on the surface; hemp patterns on the surface. The following are five common causes of appearance of rubber sheathed cables collected by cable manufacturers. Release time: 2019-08-07 Clicks: 70
Advantages of high-voltage cable power supply 1, improve transmission capacity. The natural power of a 1000kV UHV transmission line is close to 5 million kilowatts, which is about five times that of a 500kV transmission line. ± 800kV DC UHV transmission capacity can reach 6.4 million kilowatts, which is 2.1 times that of ± 500kV HVDC and 1.7 times that of ± 620kV HVDC Release time: 2019-08-05 Clicks: 41